10.0.0.1 is a reserved, class A, IPV private IP address. Used by router manufacturers as the default gateway for the routers. Because This IP address is used to access the process panel. Or admin panel of the router to set up a network.
How to use 10.0.0.1 to login to the router admin panel:
- Type in Ip Address in the URL address bar of your browser and press the Enter button of your keyboard.
- As a result, You will then be prompted to login panel and will be asked to enter username and password. If you don’t know your username and password you can find it on the back of the router.
- Choose the network section.
- Set up the network, fill your username and password you have. Now you can make the required changes in the network.
Issues connecting to router through 10.0.0.1:
Users and admins may face problems connecting to the router through 10.0.0.1. This is the most common issue generally faced. This problem may occur if none of the devices is using 10.0.0.1 on the local network. Therefore, check if any device is using the IP Address on the local network. During this Open the command prompt, and type “ping 10.0.0.1“. It’s necessary that the device should be connected to the local area network.
Other common issues of 10.0.0.1:
- Firstly Incorrect device address assignment
- Incorrect client address assignment
- Technical failure on the network or device side.
If there is an error in assigning an IP address to the device. Or if there is an IP conflict ie. two devices are having the same IP address. During this, It may have an issue in connection to the router. Besides this IP issue, any technical problem either on the network side of the device itself may also cause connection issues.